Enterprise Information

Axial fan blades work in several forms

Release time:

2021/07/20 16:11

The working mode of axial flow fan blades is similar to that of aircraft wings. However, the latter acts lift upward on the wings and supports the weight of the aircraft, while the axial flow fan fixes the position and moves the air. The cross section of the axial flow fan is generally the wing section. The blades can be fixed in position or can rotate around their longitudinal axis. The angle between the blades and the airflow or the spacing between the blades can not be adjusted or adjusted.

Matters needing attention when starting axial flow fan Surveying and mapping requirements

Release time:

2021/07/20 16:08

When the axial flow fan is started, the current of the motor will be 5-6 times higher than the rated value, which will not only affect the service life of the motor but also consume more electricity. A certain margin will be left in the selection of the motor during the design of the system. The speed of the motor is fixed, but in the process of practical application, it is sometimes necessary to run at a lower or higher speed, so it is very necessary to stop the frequency conversion transformation.

Matters needing attention when starting axial flow fan Surveying and mapping requirements

Release time:

2021/07/20 16:06

When the axial flow fan is started, the current of the motor will be 5-6 times higher than the rated value, which will not only affect the service life of the motor but also consume more electricity. A certain margin will be left in the selection of the motor during the design of the system. The speed of the motor is fixed, but in the process of practical application, it is sometimes necessary to run at a lower or higher speed, so it is very necessary to stop the frequency conversion transformation.

Ordinary type axial flow fan working principle type structure

Release time:

2021/07/20 16:01

Ordinary axial flow fans can be used for ventilation in ordinary factories, warehouses, offices, residences and other places, as well as air coolers (air coolers), evaporators, condensers, spray drops, etc. There are also mine axial flow fans. Anticorrosion and explosion-proof axial flow fans adopt anti-corrosion data and explosion-proof measures, and match explosion-proof motors, which can be used to escort explosive, volatile and corrosive gases.

Install the axial flow fan, pay attention to the impeller stage of the front deflector

Release time:

2021/07/20 15:58

The axial flow fan that has emerged in recent years is a new type of ventilation and cooling equipment that is environmentally friendly and energy-saving. Because of its large exhaust volume, good ventilation and cooling effect, low noise, small destructive installation and use to the site, low price, and wide application., Long service life and other remarkable characteristics, more and more are loved by users. Axial flow fan is the ventilation equipment that many enterprise workshops will choose.

Axial fan exhaust hood principle and centrifugal fan function

Release time:

2021/07/20 15:55

The local exhaust hood should be as close as possible to surround or close to the harmful passive, so that the harmful passive is limited to a small local space, and the suction range should be reduced as much as possible to facilitate capture and control.
< 1...111213...33 >

Links:

Xingheng Environmental Technology Group Co., Ltd.

Xingheng Environmental Technology Group Co., Ltd.

Xing Heng Environmental Technology Co., Ltd

Xingheng Environmental Technology Group

Xingheng Environmental Technology Group 2

Xingheng Environmental Technology Group Co., Ltd.