Enterprise Information

FRP cooling tower antifreeze and fan installation

Release time:

2021/07/20 09:07

FRP cooling towers have achieved good results in improving water use efficiency over the years. If we use them in cold places, especially in northern my country, we must pay attention to the problem of antifreeze. Some people may say that this kind of processing hot water and Does warm water equipment also need antifreeze? Please take a look at the analysis below.

Knowledge and Classification of Closed Cooling Tower

Release time:

2021/07/20 09:01

The cooling tower should be installed on the roof or on the ground of a building with sufficient carrying capacity. It is required to be well ventilated. The shortest interval between the air inlet of the cooling tower and the building parallel to the outer diameter of the tower should not be less than 1.5 times of the outer diameter of the tower to meet the requirement of fresh air entering the tower unimpeded. The cooling tower should not be installed in a high wall with waterproof channel and no air circulation.

Advantages and Management of Spray Cooling Tower

Release time:

2021/07/20 08:59

The spray cooling tower inherits the advantages of glass fiber reinforced plastic closed corrosion resistance and is improved. As the spray cooling tower is equipped with multiple fans, the noise is suppressed to a corresponding extent, thus having the effect of ultra-low noise. Moreover, the product correction square structure is rectangular, so it is very convenient to transport. A spray cooling tower with a width of no more than 150 cubic meters can be designed to be less than 3 meters, so it can be assembled in the factory and the flat car can be transported to the site as a whole, as the material of the fan ram is still made of glass fiber reinforced plastic, the thickness of the glass fiber reinforced plastic of the ram is relatively thick, mostly over 6mm. The hydraulic motor of the water collecting plate uses multiple reinforcing ribs or even steel profiles to effectively solve the deformation problem of the water collecting plate, while the panel and shutter use pultruded glass fiber reinforced plastic materials, which greatly improves the appearance process.

Energy source and characteristics of cooling tower transformation

Release time:

2021/07/20 08:57

The energy of cooling tower energy-saving transformation mainly comes from the surplus flow and surplus lift of the water pump in the system, so the success of the transformation is naturally inseparable from this. If the water pump of cooling tower circulating water system has no surplus flow and surplus lift (I .e. no surplus pressure), water turbine cannot be used for energy-saving transformation, but this kind of situation is still extremely rare in actual work. Generally, cavitation is taken into account in the design of water pump system, fouling and other reasons will reduce efficiency, so there is a surplus head to ensure long-term normal operation, this consideration is beyond reproach, from this point of view, the general cooling tower can be completely modified.

Glass steel cooling tower cleaning and principle

Release time:

2021/07/20 08:55

Causes of cooling tower cleaning and hidden dangers in operation

Release time:

2021/07/20 08:54

Cooling tower is mainly used in plastic, food, chemical industry, steel, refrigeration, thermal power plant, industrial water cooling and other industries, the use of water as a circulating coolant, so that the tower body heating cooling water and air flow contact heat exchange to generate steam, volatile away heat, emissions to the atmosphere, plays the role of evaporation heat dissipation, reduce water temperature, to ensure the normal use of the system.
< 1...262728...33 >

Links:

Xingheng Environmental Technology Group Co., Ltd.

Xingheng Environmental Technology Group Co., Ltd.

Xing Heng Environmental Technology Co., Ltd

Xingheng Environmental Technology Group

Xingheng Environmental Technology Group 2

Xingheng Environmental Technology Group Co., Ltd.