Generally humid environment is easy to breed bacteria, and FRP cooling tower is easy to breed bacteria due to long-term operation of the surrounding temperature is relatively low, the air is humid, in the FRP cooling tower "" 20 meters away will be affected, people generally call this bacteria "Legionella", Legionella is generally transmitted through the air, after being inhaled will appear upper respiratory tract infection and fever symptoms, severe cases can lead to respiratory failure, renal failure and even fatal pneumonia. Now many artificial water supply systems can also provide a living environment for the mass reproduction of Legionella. These systems include showers, fountains and air-conditioning equipment. The air-conditioning system needs special attention. Therefore, people who live in the air-conditioning room for a long time should pay special attention, especially in the early summer when the air-conditioning was stopped for a year and must be carefully cleaned before they can be used.
Because little knowledge of this aspect, the cooling tower did not pay attention to too many details, which led to some small mistakes. Don't underestimate these small mistakes. These small mistakes limit the working efficiency of the cooling tower. What details should be paid special attention to in the daily use of FRP cooling tower.
1. Before use, flush the inlet and outlet pipes and pools to eliminate garbage in the tower to prevent pipeline blockage.
2. The connecting bolts of each component, especially the transmission components (fan, motor, rotating water distributor), must be tightened one by one.
3. The oil level of the reducer is normal, and the belt of the belt reducer should be tightened.
4. The fan blade rotates flexibly without bumping against the shell.
5. When the fan is working, it should be clockwise when viewed from the top of the tower, and the air should be pumped upwards.
6. If there is any abnormal sound in the cooling tower, stop it immediately and check it comprehensively until the fault is eliminated.
7. After the fan is working, open the water valve and adjust the water pump flow at the same time. The water pressure, current, voltage, vibration and noise values of the cooling tower should be within the specified range.
8. When it is found that the water distributor does not turn or the water distribution is uneven, the machine should be shut down for maintenance.
9. The circulating water should be tap water or clean water, should not contain oil and impurities, and the turbidity should not be greater than 50mmg/l.
10. As an important cooling equipment, the cooling tower should be managed by a dedicated person, and the water temperature, flow rate, and meteorological parameters of the cooling tower should be recorded.
In the daily use of glass steel cooling tower, as long as the above details are noted, the efficiency of the cooling tower will be able to play.
Everyone knows that the equipment will continuously emit heat during work. The machine needs to emit this heat to operate normally. There are two ways for the machine to emit heat: one is air-cooled, the other is water-cooled, and the household air conditioner is air-cooled. The central air conditioner is water-cooled. The compressor of the cooling tower central air conditioner continuously heats up during the cooling process. If the compressor cannot be reduced to a certain temperature in time, the compressor will be heated too fast and stop working. Water cooling is usually used to cool the compressor. The water at room temperature passes through the compressor to absorb heat, and the water temperature rises to reduce the temperature of the compressor.
If the water temperature is high, it can no longer be used to cool the compressor. Only normal temperature water can be used again, and this part of water can be released or cooled for reuse. If the water is changed once, it is really too wasteful, because this part of water is basically more than 50 tons per hour. It is too evil not to recycle it. However, it is very slow to wait for it to cool naturally, especially in summer when the temperature is high, then it will affect the use of the equipment. At this time, the glass fiber reinforced plastic cooling tower will come in handy. The glass fiber reinforced plastic cooling tower makes the hot water become normal temperature, reuse and recycle.
Shandong Xingheng Environmental Technology Group Co., Ltd. is located in Luquantun Development Zone, Dezhou, Shandong Province, the hometown of glass fiber reinforced plastic in China. The company has three-level qualification for construction mechanical and electrical installation engineering, three-level qualification for environmental protection engineering, and safety production license. It is the first in the industry to pass ISO9001 quality management system certification, ISO14001 environmental management system certification, OHSAS18001 occupational health management system certification, an axial fan invention patent, a fan utility model patent, EIA, three at the same time and other procedures are complete.