News

Home page

全部分类

Can the air energy heat pump be installed with the radiator?

Release Time：2021-07-21

In the heat pump industry, there is a statement that three products are installed in seven points. This statement is not groundless, because a good installation method has a great influence on the later use of the unit, and the air energy heat pump is no exception. Therefore, it is necessary to pay attention to several points in the installation of air energy heat pump.
When installing the air energy heat pump host, it is necessary to conduct a detailed survey of the installation site, select the appropriate installation location of the host, and then make the infrastructure of the equipment, so as to ensure the stable placement of the host after installation. After installation, the circuit, water circuit, water pump, air source heat pump solenoid valve, water temperature sensor, pressure switch, etc. need to be connected according to the circuit diagram of the unit, water circuit pressure test, and unit trial operation, ensure the normal operation of each system, if the unit is operating normally, then it is necessary to heat the pipeline of the unit.
The installation of the air energy heat pump unit has higher requirements for the space environment, and has different requirements for different locations of the installation. Try to install it on the ground, on the roof and other places with better ventilation conditions, so as to ensure that the heat dissipation of the host heat exchanger is not hindered.
After installation, it is necessary to consider the drainage, rain and snow prevention and space reservation required for later maintenance of air source heat pump equipment. Good drainage and rain and snow prevention can make the operation of air source heat pump more stable. Reserving installation space in advance during installation can provide convenience for later maintenance personnel.
Although the air energy heat pump can be used in conjunction with the radiator, it is worth noting that the hot water temperature required by the radiator is generally above 60 ℃, so the temperature is much higher than that of the floor heating method, which will also make the air energy heat pump operate at high load and increase the energy loss. Compared with the ordinary floor heating method, the air source heat pump consumes more electricity. If the user does not mind the cost, the operation is completely no problem.
In fact, the best terminal method is floor heating. Generally speaking, the hot water temperature required by the hot water in the floor heating pipeline matched by the air energy heat pump is 35-45 ℃, so the use effect of the air energy heat pump will be very obvious, and the floor heating method will be more comfortable. It releases heat from bottom to top, and the hot water flows along the pipeline, so that the heating in the whole house can be free of any dead corners, high comfort and fast heating, more in line with the health needs of the human body.
Shandong Xingheng Environmental Technology Group Co., Ltd. is located in Luquantun Development Zone, Dezhou, Shandong, the hometown of FRP in China. The company has Grade II qualification for fire protection facilities engineering, Grade II qualification for construction mechanical and electrical installation engineering, Grade II qualification for environmental protection engineering, and safety production license. It is the first in the industry to pass ISO9001 quality management system certification, ISO14001 environmental management system certification, OHSAS18001 occupational health management system certification, and an axial fan invention patent, A fan utility model patent, environmental assessment, safety assessment, three simultaneous and other procedures are complete.